Step 1: Gathering the Essential Materials
Before diving into the replacement process, ensure you have the necessary materials. You will need:
- Replacement fly mesh, selected based on your specific needs (fibreglass for cost-effectiveness, aluminium for durability, or heavy-duty screens for pet owners).
- A flat-head screwdriver or a spline roller tool.
- A utility knife for trimming the mesh.
- New spline (the rubber cord that holds the screen in the frame).
- A measuring tape.
Step 2: Removing the Old Screen
Carefully remove the window screen from the frame. Using the screwdriver gently pry out the old spline and remove the damaged mesh. Be mindful not to bend the frame during this process. If the spline isn’t brittle it can be reused.
Step 3: Preparing the New Mesh
Measure your window frame and cut the replacement mesh, leaving a between 50 and 100mm on each side for an easier installation. This extra allowance ensures you have enough material to work with.
Step 4: Installing the New Mesh
Lay the new mesh over the frame. Starting from one corner, use the spline roller to press the spline and the mesh into the groove of the frame. Work your way around the frame, ensuring the mesh is taut and even. This step requires patience and attention to maintain even tension across the mesh. Before you proceed, use the tape measure to measure the diagonal on each corner to ensure the screen is still square.
Whilst Aluminium mesh and fibreglass mesh tend not to buckle the frames. Because Pet mesh is stronger, be aware on large frames it is possible to pull the frames inwards when tensioning the mesh. The best way to stop this is to brace the frame with a thin piece of timber cut to size.
Step 5: Trimming Excess Mesh
Once the spline is securely in place, trim the excess mesh with a utility knife. Be careful not to cut into the newly installed screen. Be aware of the angle you place the knife blade at because if the angle is too sharp, you can accidently damage your newly installed mesh.
Step 6: Reinstalling the Screen
After trimming, reinstall the screen back into the window frame.
Conclusion: The Benefits of DIY Screen Replacement
Replacing fly screens in aluminium window screens is not only cost-effective but also a gratifying DIY project. It enhances your living space's comfort and functionality, keeping it free from insects and allowing for unobstructed fresh air flow.
While DIY is a great option, remember that professionals at Strathalbyn H Hardware are always ready to provide expert services for those who prefer a hassle-free solution. With our onsite rescreening services, you can enjoy swift, high-quality repairs with a range of material options tailored to your needs.
